Tray Installation And Adjustment; Foot Strap Adjustment (Optional); Shoe Holder Strap Adjustment (Optional) - Zippie VOYAGE Besitzerhandbuch

IX. DEALER SERVICE & ADJUSTMENT
K. TRAY INSTALLATION AND ADJUSTMENT:
1. Slide the tray over the tray supports, adjust depth and click into place.
2. Check that nut (C) is just loose enough so that the tray can be adjusted.
3. Knob (D) is loosened to adjust the depth of the tray and tightened on both sides to
hold the adjustment.
4. Adjust the angle of the tray by holding in both knuckle buttons (E) on the support
arms and raising the tray to desired angle, the tray should click in place for a
positive lock.
WARNING
Using a pelvic positioning belt is critical for child safety when foot straps or shoe
holders must be used for therapeutic positioning needs.
L. FOOT STRAP ADJUSTMENT (OPTIONAL):
: Optional foot straps are intended for therapeutic positioning needs only.
NOTE
1. Engage wheel locks, then seat the child.
2. Unlatch and loosen the two foot straps (F).
3. Place child's foot into position and snap the foot strap into place.
4. Keep the straps as loose as possible and only tighten enough to maintain
therapeutic position.
M. SHOE HOLDER STRAP ADJUSTMENT (OPTIONAL):
: Shoe holders are intended only for therapeutic positioning needs.
NOTE
1. Engage wheel locks and seat the child.
2. Loosen the shoe holder straps (F).
3. Child should be wearing shoes for this step. Place child's foot into shoe holder
and snap the two shoe holder straps into place.
4. Keep the straps as loose as possible and only tighten enough to maintain a
therapeutic position.
MK-100301 EU_EN_Rev. 6.0 - US Rev. F
32
33
30 30
E N GL I SH
E
C
D
F
32
33