CombiSteel 7151 Serie Gebrauchsanweisung Seite 9

3.2 Glass mounting instructions
Fig 1.
Place your appliance on a flat, level ground.
Front view of the flat cooler
Front view of the inclined cooler
Mount your glass by placing it on the mounting rack below by placing one side, then placing on the other side
and fix it as shown in Figure 2.
Then place the glass stopper on the left side of the lower canal with the tabs in the back.
Slide the glass on the bottom channel to the left (Figure 3). Do the same with the channel gap in the right side
so that the tabs of the glass stopper pass through the channel. Do the same by repeating the same process
when installing the upper glass.
NOTE: Glass stoppers shall be installed to the profile duct on the front side of the cabinet for flat cabinet, and
to the profile duct on the rear side of the cabinet for slanted cabinet
9
www.combisteel.com