Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.2 Cleaning and maintenance
1. For efficiency of your deep freeze, perform cleaning and maintenance at least once in a year.
2. Unplug your cooler from mains power before cleaning it.
3. Always wear protective gloves during cleaning and maintenance. This will protect you against injuries.
4. Do not use domestic cleaning agents and abrasive - scratching materials to clean. Never use flowing or
pressured water to wash.
5. Never wash inside or outside of your appliance. This may give damage to your appliance or cause electric
shock.
5.3 Maintenance
The appliance does not require periodic maintenance
Internal Cleaning
•
Place the products inside your cooler to a cool environment where they shall retain their temperatures.
•
Before performing internal cleaning, wait until the temperature of the inner parts of the appliance increases
up to the ambient temperature.
•
Always wear protective gloves during cleaning and maintenance. This will protect you against injuries.
•
Remove the accessories.
•
Perform cleaning by using a soft cotton cloth and warm water.
•
Dry it by using a dry cotton cloth. If it is not dried, it may turn black in time.
•
Ensure that the inner surface is not wet or moist after cleaning.
•
You can reload your food 2 hours after operating based on the type of operating specified within this manual.
External Cleaning
Clean by using cotton cloth and warm water. Prevent cleaning water from entering the front electrical and
illumination sections during cleaning.
Caution! Never use chemical agents such as commercial cleaning agents, scratching detergents, acids.
Turning Off Your Appliance
Place the food in the appliance where appropriate.
• Unplug your appliance. Perform the following if your product shall not be used for a long period;
• Clean your product. Otherwise, moisture remaining on the walls of the appliance may cause darkening on the
inner surface.
WARNING: If your product shall be stored in a closed environment after turning it off;
Do not cover your product with plastic material. A plastic material may cause your appliance release odour and
perspiration as it does not permeate air through it. Perspiration may cause rusting.
If you do not keep your appliance with its sliding door open, it may release odour.
WHEN TRANSPORTING,
1. Remove the plug from the outlet.
2. Melt the ice.
3. Wipe the inner surfaces and floor with a damp cloth.
4. Transport it in the normal operating position.
www.combisteel.com
13
Werbung
