Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.3 Castor mounting instructions
•
Place your appliance as shown in Figure 2. Then, mount two castors with brakes in the to the back side of
the container, by fixing the castors in the sockets under the container and ensure that the socket centers are
aligned, as shown in figure 4. Then place the U-pins through the holes. Ensure the stability by placing the
pim wedges.
•
By placing the container as shown in figure 3, mount the two castors in the castor box as shown in figure 5,
by applying the same procedure.
3.4 Climate Class Description
Your cooler provides best cooling performance in the conditions specified below as per the climate class. Thus,
ensure that the environment where your cooler shall be used conforms with this temperature ranges.
Climate class
Minimum operating ambient temperature
and humidity
A
+16°C, 80 %
B
+16°C, 80 %
C
+16°C, 80 %
3.5 Product Climate Class Description
This is the temperature range determined by the protection temperature of the product to be placed inside the
cooler.
Climate class
Hottest product temperature
C1
-18,0°C
C2
-7,0°C
S
Special product classification
The display cabinets you have purchased have the climate class of BC1 and they are manufactured so that they
shall operate in an average ambient temperature between +16°C and +35°C.
Operating the product out of the mentioned temperature range may cause performance losses.
Maximum operating temperature
ambient temperature and humidity
30°C, 55 %
35°C, 75 %
40°C, 40 %
www.combisteel.com
10
Werbung
