Capitani multi cap Bedienungsanleitung Seite 29

Coffee temperature adjustment
It is possible to adjust the coffee temperature on the two units with the following procedure:
• Switch on the machine by holding down the button
•Wait while holding down the button
• Press the button
with respect to the factory temperature is +4°C.
• Press the button
decrease with respect to the factory temperature is -10°C.
•Switch off the machine to save the new set temperatures.
NOTE
If you want to adjust the temperature of the other coffee unit, proceed again as indicated above.
The chosen temperature is displayed as in the following table:
TEMPERATURE
+4°C
+2°C
Factory setting
-2°C
-4°C
-6°C
-8°C
-10°C
Once coffee/tea is prepared
Once you have prepared coffee/tea you can eject the used capsule as follows:
1. Lift the control lever backwards (1) and push it right back (the capsule falls into the container
provided). NOTE Used capsules may get stuck inside the machine if they are not ejected straight away.
If that happens, lift and lower the control lever to free the capsule(s).
- Empty the drip tray and the capsule receptacle on a regular basis.
SAFETY AND ENERGY-SAVING TIPS:
- If you are going to be away from home for some time, remember to power off the machine (buttons 10
and 11). Do the same at night before going to bed. The coffee machine heats up very rapidly and is
normally ready for use in 1 minute after power-on.
-If you plan not to use the coffee machine for a long period of time, empty the tanks (15) and (16) and
unplug the coffee machine.
(A) to increase the temperature in steps of 2°C. The maximum increase
(C) or (E) to decrease the temperature in steps of 2°C. The maximum
BUTTON (A)
2 flashes every 3 seconds
1 flash every 3 seconds
OFF
(A)
(A); release button (A) after about 3 seconds.
BUTTON
OFF
1 flash every 3 seconds
2 flashes every 3 seconds
3 flashes every 3 seconds
4 flashes every 3 seconds
5 flashes every 3 seconds
27
(C) OR (E)