Use Only Taps With An Open/Close Valve - Capitani Multi Cap Bedienungsanleitung

Connection to the water mains (optional)
ATTENTION
• Use a washing machine hose with a 3/4 female fitting

• Use only taps with an open/close valve

• Fit the washing machine hose on the tap with
open/close valve of the water mains using the
coupling provided (Fig. 5)
• Switch off the machine and remove the plug
from the power socket.
• Connect the hose to the water connector (D)
on the rear of the machine (Fig. 6)
• Screw the hose well onto the water connector
as shown in the figure (Fig. 7)
Perform a leak test by turning on the tap. If there
are water leaks, repeat the operation.
ATTENTION
•Do not leave the machine unattended.
•Should the machine remain unattended, turn off
the tap of the water mains that supplies water to
the machine.
•Turn off the main switch of the machine.
•Should there be any water leaks, switch off the
machine immediately and turn off the mains tap,
take the plug out of the socket and call the
assistance service.
D
Fig. 6
D
Fig. 7
22
Fig. 5