Capitani multi cap Bedienungsanleitung Seite 28

ATTENTION:
For correct hygiene and to maintain high product
quality, clean the cappuccino attachment (21)
after each dispensing operation.
Cleaning the cappuccino attachment
• Insert the hose of the cappuccino attachment
(21) in a container of water.
• After having placed a cup on the grid under
the outlet of the cappuccino attachment (21), start
a washing cycle by pressing button (12).
To stop dispensing, press button (12) again.
Repeat the operation if necessary until the
cappuccino attachment is clean (Fig. 18).
• Turn the cappuccino attachment (21) counter-
clockwise, turn it upside down and wash it under
a jet of running water until it is clean (Fig. 19).
•For more accurate cleaning, dismantle the
cappuccino attachment (21) and wash it in the
dishwasher, extracting the various parts and
cleaning them well (Fig. 20). Once it is clean,
reassemble all the connections correctly, checking
the seal of the red O-rings on the connector, then
insert the cappuccino attachment, turning it
clockwise.
Fig. 18
Fig. 19
Fig. 20
26
12
21
21