Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DMX-CONTROLLED OPERATION
You can control the LED Panels individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
For DMX-controlled operation set DIP switch 10 to ON. Dip switches 1 - 9 set the DMX address.
Addressing the device
Each device occupies 48 or 96 channels. To ensure that the control signals are properly directed to each
device, the device requires addressing. This is to be adjusted for every single device by changing the DIP-
switches.
The starting address is defined as the first channel from which the device will respond to the controller.
If you set, for example, the address to channel 49, the device will use the channel 49 to 96 for control.
Please make sure that you do not have any overlapping channels in order to control each device correctly
and independently from any other fixture on the DMX data link. If two, three or more devices are addressed
similarly, they will work similarly.
Controlling:
After having addressed all LED Pixel Panels, you may now start operating these via your lighting controller.
DMX-protocol
Channel
Attribute of the LED Number:
CH 1
CH 2
CH 3
CH 4
CH 5
CH 6
CH 7
CH 8
CH 9
CH 10
CH 11
CH 12
CH 13
CH 14
CH 15
CH 16
CH 17
CH 18
CH 19
CH 20
CH 21
CH 22
CH 23
CH 24
R1
G1
B1
R2
G2
B2
R3
G3
B3
R4
G4
B4
R5
G5
B5
R6
G6
B6
R7
G7
B7
R8
G8
B8
24/26
Channel
Attribute of the LED Number:
CH 25
CH 26
CH 27
CH 28
CH 29
CH 30
CH 31
CH 32
CH 33
CH 34
CH 35
CH 36
CH 37
CH 38
CH 39
CH 40
CH 41
CH 42
CH 43
CH 44
CH 45
CH 46
CH 47
CH 48
00056820.DOC, Version 1.1
R9
G9
B9
R10
G10
B10
R11
G11
B11
R12
G12
B12
R13
G13
B13
R14
G14
B14
R15
G15
B15
R16
G16
B16
Werbung
