Herunterladen Diese Seite drucken

Scandomestic SFO 4102 W Bedienungsanleitung Seite 70

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

5 Press the Start/Pause button, the dishwasher will start after 10 seconds.
It is dangerous to open the door mid-cycle, as hot steam may scald you.
Auto Open
After washing, the door will open automatically to achieve
better drying effect.
NOTE
The dishwasher door must not be blocked when set to open automatically.
This can disrupt door lock functionality.
ERROR CODES
If there is a malfunction the dishwasher will display an error code. The following table shows
possible error codes and their causes.
The Rapid light flicker fleetly
Longer inlet time.
Faucets is not opened, or water intake is restricted,or water pressure is too low.
The Rapid and 90 Min light flicker fleetly
Not reaching required temperature.
Malfunction of heating element .
The Glass light flicker fleetly
Overflow
Some element of dishwasher leaks .
The Eco
Glass and Rapid light flicker fleetly
,
Failure of communication between main circuit board with display circuit board.
Open circuit or break wiring for the communication
WARNING
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak, the water should be
removed before restarting the dishwasher.
If there is an error code that cannot be solved, please request professional assistance.

Werbung

loading

Diese Anleitung auch für:

Sfo 4102 x