Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Spray arms
It is necessary to clean the spray arms regularly for hard water chemicals will clog the spray
arm jets and bearings.
To clean the spray arms, follow the instructions below:
• To remove the upper spray arm, hold the nut in the center still and rotate the spray arm
counterclockwise to remove it.
• To remove the lower spray arm, pull out the spray arm upward.
• Wash the arms in soapy and warm water and use a soft brush to clean the jets. Replace
them after rinsing them thoroughly.
Werbung
