Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
When putting in foods, limit the time you open the freezer door to a minimum.
•
Keep the door seal clean. Replace a damaged door seal.
TROUBLESHOOTING
You can solve a number of common problems on your own. If the freezer is not working properly, check the
following points before calling a service technician:
The freezer does not work
•
The power cord is disconnected.
•
The main house breaker is off .
•
Thermostat is set in the OFF position.
•
The electrical outlet is not under voltage. Test the functionality of the outlet by plugging in another
appliance.
Odour
•
Put the aromatic foods in a well sealed container.
•
Check, if some of the foods are not spoiled or mouldy.
•
Clean regularly the interior of the freezer.
The compressor runs too long
•
It is usual that in the summer month with high ambient temperatures the compressor runs for longer time.
•
Do not place in the freezer a great quantity of fresh foods at once.
•
Place in the freezer only cold foods.
•
Opening the door too frequently.
•
Strong layer of ice.
The light in the freezer does not work
•
Check, if the main switch is on.
•
Check the light bulb for damage. Disconnect the freezer from the power supply, unscrew the light bulb's
cover and replace the bulb.
Freezer door cannot be closed securely
•
Food packaging is caught between the door and the seal of the freezer.
•
Too many foods in the freezer.
•
The freezer is tilted.
Noisy freezer
The circulation of the cooling medium makes some noise (gurgling sounds), even if the compressor is not
running. This is entirely normal and does not present a problem. A clicking noise caused by the solenoid or
electrical switch is normal and not a problem. In case of hearing other noises, check the following:
•
Check if the freezer is in horizontal position.
•
Check if it is not touching other devices or kitchen equipment.
•
Check if the interior of the freezer does not vibrate.
Condensation and warm surface
•
At higher humidity condensation of moisture can appear on the outer surfaces and door seal. It is not
a malfunction, wipe off the moisture with dry cloth. Higher surface temperatures, especially in the summer
months are caused by radiation of heat from the evaporator. This is not a malfunction.
GB
41
Werbung
Inhaltsverzeichnis
