Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.8.4
Brightness
In this tab, the display brightness can be adjusted from 10 % to 100 %. Automatic dimming can
also be set. After a set time, the display will be dimmed to a lower brightness in order to save
energy. Pressing any key will set the brightness back to its original value.
5.8.5
Language
This menu is used to switch between different menu languages. The available languages are
English, German, French, Spanish, Italian, Dutch, Portuguese, Turkish, Polish, Russian, Chinese
and Japanese.
5.8.6
Auto power off
This option enables the auto power off function. The available time periods are 1 minute, 5
minutes and 15 minutes. After the set time period has elapsed, the device will automatically turn
off and pressing any key will reset the timer. It is also possible to disable the auto power off
function.
5.8.7
Reset
This menu is used to reset the device to its factory settings. Device settings are separate from
the calibration and each can be reset individually by selecting the corresponding menu item.
A reset of the device settings will load default values for the measurement parameters and any
remaining menu options. A calibration which may have been performed beforehand is retained.
In order to prevent an inadvertent reset of the calibration, a code is required to enter this menu.
The code is the same as for the calibration itself: 1402.
ATTENTION:
When the calibration is reset, the previously performed and saved calibration will be deleted and
a default calibration for the supplied sensor will be selected. It is recommended to perform a
calibration after the reset.
The reset must be confirmed via the subsequent confirmation dialogue. The device will
automatically restart after the reset.
Fig. 13 Code request
Fig. 14 Confirmation dialogue
© PCE Instruments
47
Werbung
