Conrad Boskon Guard RW12MP Bedienungsanleitung Seite 56

• "Interval"
Here you can set a time span between the recordings triggered by a movement. I.e. when a
recording has been made, the camera will wait for the indicated time before it is able to record
again.
Times between 1 second and 60 minutes can be set.
• "Beep"
Switches the button sound in operation off or on.
• "Sense Level"
Here, you can set the sensitivity in 3 levels, "Low", "Medium" and "High".
• "Set Clock"
Set the date, time and format for the date here.
(Y/M/D = year/month/day; D/M/Y = day/month/year; M/D/Y = month/day/year)
If you use the PC software to configure, first select the desired date format. Then click the
button "Get Time". This assumes the time from your computer.
• "Timer"
Here, you can set the times (from to) at which the camera is to be active every day. Up to 4
times can be specified.
• "Time Lapse"
If you activate this function, the camera will make a recording after the set time. The motion
detector is then deactivated.
Times between 1 minute and 24 hours can be set.
• "Format" (possible only directly via the camera menu)
With this function, you can format the inserted memory card. All files are deleted in this!
• "TV"
Select the desired TV standard "PAL" or "NTSC" here.
• "Time Stamp"
If this function is active, each picture and each video is applied with a time stamp.
56