Husqvarna K1270 II R Bedienungsanweisung Seite 3

9. Start instruction decal
10. Choke control
11. Throttle lockout
12. Throttle trigger
13. Air purge bulb
14. Stop switch
15. Air intake
16. Starter rope handle
17. Starter housing
18. Type plate
19. Combination wrench
Symbols on the product
WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Use approved protective helmet, hearing
protection, eye protection and respiratory
protection. Refer to
equipment on page 5 .
Dust forms when cutting. The dust
can cause injuries if inhaled. Use an
approved respiratory protection. Avoid
inhaling exhaust fumes. Always provide
for good ventilation.
WARNING! Kickbacks can be sudden,
rapid and violent and can cause life
threatening injuries. Read and understand
the instructions in the manual before using
the product.
Sparks from the cutting blade can cause
fire in fuel, wood, clothes, dry grass or
other flammable materials.
Make sure that the cutting blade does not
have cracks or other damages.
Do not use circular saw blades.
1390 - 001 - 10.01.2020
Personal protective
Choke
Air purge bulb
Decompression valve
Starter rope handle
Use a fuel mixture of gasoline and oil.
Note:
Other symbols/decals on the product refer to
special certification requirements for some markets.
Start instructions decal
To start the product with a cold engine on page
Refer to
9 and To start the product with a warm engine on
page 10 for instructions.
3