Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Things to be done for energy
saving
• Pay attention not to open doors
very frequently and do not leave the
doors open for a long time.When
doors are open, warm air enters
the fridge/freezer cabinets and the
appliance runs more to cool down
the foodstuffs.This yields more
energy consumption.Thus please do
not open doors frequnetly and for
a long time in order to save energy
and maintain foods at ideal storage
temperature.
• Do not put hot food or drinks in your
refrigerator.
• Do not overload your refrigerator so
that the air circulation inside of it is not
prevented.
• Do not install your refrigerator
under direct sunlight or near heat
emitting appliances such as ovens,
dishwashers or radiators.
• Pay attention to keep your food in
closed containers.
• Thawing frozen food in fridge
compartment will both provide energy
saving and preserve the food quality.
• For loading maximum foodstuff in
your freezer compartment, middle
drawer may be removed. Declared
energy consumption value of your
refrigerator is determined while the
freezer compartment is loaded
without middle drawer for maximum
loading configuration.
• It is highly recommended that bottom
and top drawers are always used in
place when loading. Middle drawer is
provided for ease of use if needed.
•If rear backwall condanser of your
appliance can be reached by
pulling the appliance forward and
without any tool,please clean the
dust off regularly to maintain high
performance.
• Recommended temperature
setting is -20 °C for freezer
compartment.Energy
consumption of your appliance
is declared while temperature
is set to -18 °C for low ambient
temperature conditions.
• Please use provided 2
pieces of cold pack (PCM) at
recommended places below
when storing foodstuffs inside
of freezer top drawer.They help
to keep your appliance's energy
consumption lower.
cold pack
foodstuffs
7
EN
cold pack
foodstuf fs
Werbung
