Safety Instructions - Create WIND CALM Bedienungsanleitung

When using any electrical appliance, basic safety precautions should
always be observed.
Read this entire manual carefully before beginning installation. Save
•
these instructions.
To reduce the risk of personal injury, attach the fan directly to the su-
•
pport structure of the building according to these instructions, and use
only the hardware supplied.
To avoid possible electrical shock, before installing your fan, discon-
•
nect the power by turning off the circuit breakers to the outlet box and
associated wall switch location. If you cannot lock the circuit breakers
in the off position, securely fasten a prominent warning device, such as
a tag, to the service panel.
All wiring must be in accordance with national and local electrical co-
•
des and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified
electrician.
Do not bend the blade attachment system when installing, balancing,
•
or cleaning the fan.
Never insert foreign objects between rotating fan blades.
•
To reduce the risk of fire, electrical shock, or motor damage, do not use a
•
solid-state speed control with this fan. Use only original speed controls.
This appliance can be used by children aged from 8 years old and above
•
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and un-
derstand the hazards involved.
Children shall not play with the appliance.
•
Cleaning and user maintenance shall not be made by children unless
•
they are older than 8 and supervised. Close supervision is necessary
when any appliance is used by or near children.

SAFETY INSTRUCTIONS

E NGLI SH
7