HomeMatic IP HmIP-eTRV-B-2 Installations- Und Bedienungsanleitung Seite 51

*If empty batteries are not replaced, the radiator thermostat moves to a "valve error
position". This avoids that the set temperature in the room cannot be reached any
0 6 12
18
more due to a low battery. A valve error position of 15 % is set in the factory settings.
Mo Tu We Th Fr Sa Su
AUTO
Lock symbol (
BOOST
MANU
Offset
0 6 12 18 24
Mo Tu We Th Fr Sa Su
Prg
AUTO
Antenna
BOOST
MANU
symbol ( ) flas-
Offset
hing
Prg
Short orange
flashing
1x long green
lighting
1x long red ligh-
ting
Short orange
flashing
(every 10 s)
Fast orange
flashing
24
) Operating lock activated
Communication problem with
Homematic IP Access Point or
connected device
Radio transmission/attempting
to transmit/configuration data is
transmitted
Transmission confirmed
Transmission failed or duty cycle
limit is reached
Pairing mode active
Direct pairing mode active
Troubleshooting
Deactivate the
operating lock via
the app.
Please check the
connection with
the Homematic IP
Access Point or the
connected devices.
Wait until the
transmission is
completed.
You can continue
operation.
Please try again
(see sec. see „9.2
Command not
confirmed" on
page 49 or see
„9.3 Duty cycle" on
page 50).
Please enter the
last four numbers
of the device serial
number to confirm
(see see „5.1.2 Ad-
ding to the Access
Point (alternative)"
on page 38).
Activate the pai-
ring mode of the
device you want to
add (see see „5.1.1
Direct pairing with
a Homematic IP
device" on page
37)
51