Veripart VPVR144NFE Benutzerinformation Seite 39

4. Dismantle the cover of the door and
mount it on the other side. Lift the door off
the hinge and place it on a soft surface to
avoid scratches.
5. First dismantle both adjusting legs. Then
dismantle the hinge bracket on the bottom
right-hand side of the appliance. Unscrew
the hinge pin from the bracket. Turn the
bracket over and screw the hinge pin
back on.
6. Install the hinge bracket on the other side of the device. Then replace the two adjusting
legs.
7. Remount the door. Make sure the door is
level horizontally as well as vertically so
that the gaskets close properly on all sides
before tightening the top hinge.
39