Items Supplied; Proper Use; Technical Data - EINHELL TC-PG 35/E5 Originalbetriebsanleitung

21b Washers for wheels (outside)
22 Nuts size M8
23 Spark plug wrench
24 Oil fi ller funnel

2.2 Items supplied

Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Original operating instructions

3. Proper use

The device is designed for applications operated
with a 230 V alternating current source. Be sure to
observe the restrictions in the safety instructions.
The generator is intended to provide electric tools
and light sources with electricity.
When using the device with household applian-
ces, please check their suitability in accordance
with the relevant manufacturer's instructions. In
case of doubt, ask an authorized dealer of the
respective appliance.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Anl_TC_PG_35_E5_SPK9.indb 18 Anl_TC_PG_35_E5_SPK9.indb 18
GB
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Generator ....................................... Synchronous
Protection type: ........................................ IP 23M
Continuous rated power P
..................................................... 2600 W/230 V~
Maximum power P (S2 5 min): . 2800 W/230 V~
max
Maximum power P (2 min): ...... 3100 W/230 V~
max
Rated voltage U : ..............................2 x 230 V~
rated
Rated current I : ........................ 11.3 A (230V~)
rated
Frequency F : .......................................... 50 Hz
rated
Drive engine design: ..............4-stroke, air-cooled
Displacement: ......................................... 208 cm³
Max. power: ..................................4.1 kW / 5.6 hp
Fuel: ....................... normal unleaded petrol (E10)
Tank capacity: .................................................15 l
Engine oil: ................................................ ca. 0.6 l
Consumption at 2/3 load: ............... approx. 1.5 l/h
Weight: ........................................................42 kg
Sound pressure level L
Sound power level L : K uncertainty ...................
WA
............................................ 96 dB (A)/2.07 dB(A)
Power factor cos ϕ: .......................................... 1
Power class: ....................................................G1
Max. temperature: ....................................... 40°C
Max. altitude (above mean sea level): ..... 1000 m
Spark plug: .......................................... LGF7RTC
Operating mode S1 (continuous operation)
The machine can be continuously operated with
the quoted power output.
Operating mode S2 (temporary operation)
The machine may be temporarily operated with
the quoted power output. Afterwards the machine
must be stopped for a while to prevent it from
overheating.
- 18 -
(S1): ......................
rated
: ................... 74.1 dB(A)
pA
03.06.2019 11:12:52 03.06.2019 11:12:52