Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
System Reset
Setup to enter the main menu. Navigate to the function „System Reset". Confirm the
Press F3
reset by pressing F3
Note: When you reset the meter, all settings, calibrations and readings will be deleted completely.
Printing via Bluetooth (only possible with the optional Bluetooth printer)
How to set up a Bluetooth connection with the printer
1. Turn on the portable Bluetooth printer.
2. Select Master mode as Bluetooth mode (4.2.2) for the
meter.
3. You will be asked if you wish to search for Bluetooth
printers nearby. Select "Yes" if you are setting up the
printer for the first time. Otherwise, select „No".
The meter will try to establish a Bluetooth connection with the printer. Wait for a few seconds. When
the Bluetooth status LED glows continuously, this means that the meter is connected to the printer.
Note: When the meter is switched off and back on, the Bluetooth function will be disabled
automatically to save power.
Print
In the Memory Manager, the saved data sets can be printed
by using the portable Bluetooth printer. Choose „Print" to print
the selected data set. You can also print all saved data sets
via „Print All".
You can also print the current measured value directly via F1
after each measurement.
or exit by pressing F1
© PCE Instruments
.
28
Werbung
Inhaltsverzeichnis
