Hendi HND298060 Bedienungsanleitung Seite 5

• Do not clean or store the machine unless it is completely cooled down.
• Do not move the machine while it is under operation. Unplug the machine when
moving the machine and hold it at the bottom.
• Do not operate the machine without ingredients to avoid overheated.
• Ensure the machine is switched OFF (0) and the speed dial in the "Low" position
before removing the jug set.
Intended use
• This appliance is intended for professional use.
• The appliance is designed for blending and
mixing food. Any other use may lead to damage
to the appliance or personal injury.
Grounding installation
This appliance is classified as protection class I
appliance and must be connected to a protective
ground. Grounding reduces the risk of electric
shock by providing an escape wire for the elec-
Main parts of the machine
10
1
2
9
8
7
6
5
4
3
• Operating the appliance for any other purpose
shall be deemed as a misuse of the device. The
user shall be solely liable for improper use of
the device.
tric current. This appliance is equipped with a
cord having a grounding wire with a grounding
plug. The plug must be plugged into an outlet
that is properly installed and grounded.
1. Power switch (0 / I)
: Flip to "I" position to switch ON the machine;
: Flip again to "0" position to switch OFF the
machine
2. Speed dial (Low to High)
: Dial clockwise to increase the rotation
speed;
: Dial anti-clockwise to decrease the rotation
speed.
3. Pulse button : Full speed impulse move-
ment. Press downwards to
operate, release the button
to stop.
4. Bottom of the motor base unit
5. Motor unit
6. Blade assembly
7. Jug set
8. Jug lid
9. Cover cap
10.Protective cover
EN
5