Maintaining The Network Connection; Establishing A Connection To A Network; Wlan Connection Via Wps - Medion P85333 Bedienungsanleitung

The digit position for the year flashes.
 Set the year using  and press OK to confirm.
The digit position for the hour flashes.
 Set the hour using  and press OK to confirm.
The digit position for the minutes flashes.
 Set the minutes using  and press OK to confirm.

11.2. Maintaining the network connection

If the network connection is to remain active even when in standby mode or in
operating modes that do not use WLAN such as AUX IN or FM radio (increasing
power consumption in standby mode), select YES. When you press YES to confirm
this setting, the internet and network functions are available more quickly when the
device is switched on.
When NO is set, the network connection is re-established when the internet radio
is switched on after having been on standby.

11.3. Establishing a connection to a network

The names (SSID) of the networks found are shown in a list. WLAN access points that
provide connections via WPA are indicated with [WPS].
Beneath this, you will see:
NEW SEARCH: start a new search
MANUAL CONFIG: enter connection data manually
11.3.1. Connecting via WLAN
 Select the WLAN access point for connection with the internet radio and press
OK on the remote control to confirm.
In case of an unencrypted (open) WLAN access point, the internet radio establishes
the connection automatically.
 To connect with an encrypted network, observe the following sections.

11.4. WLAN connection via WPS

Once a WLAN network providing the option to connect via WPS has been selected,
the WPS menu appears. If you do not want to establish a connection via WPS, select
SKIP WPS here.
11.4.1. WPS button
 Select PUSH BUTTON to enable the WPS function to be used via the router's
WPS button.
 Then press the WPS button on the router and press OK to confirm the
connection with the internet radio.
To this end, please also note the information in your router's user manual.
• The device will now establish a connection with the network. Once the
connection is successful, a corresponding notice is then displayed.
DE
FR
NL
ES
IT
EN
351