Indoor Unit; Outdoor Unit - Mitsubishi Electric MLZ-KY20VG Bedienungsanleitung

N
AME OF EACH PART

Indoor unit

Air inlet
Air outlet
Air cleaning fi lter
(V Blocking Filter)
Safety strings
Display section
Emergency operation switch
When the remote controller cannot be used...
Emergency operation can be activated by pressing the emergency operation
switch (E.O. SW) on the indoor unit.
Each time the E.O. SW is pressed, the operation changes in the following order:
Operation indicator lamp
Emergency COOL
Emergency HEAT
Set temperature : 24°C
Fan speed : Medium
Stop
Horizontal vane : Auto
Horizontal vane
Vertical vane
Intake grille
Air fi lter
(Air purifying fi lter)
Spec name plate *1
Remote control receiving section

Outdoor unit

Outdoor units may be different in appearance.
*1 The manufacturing year and month is indicated on the spec name plate.
P
REPARATION BEFORE OPERATION
Before operation: Insert the power supply plug into the power outlet and/or
turn the breaker on.
Installing the remote controller batteries
4.
Press RESET.
1.
Remove the front lid.
Setting current time
1.
Press CLOCK.
4.
Press CLOCK again.
Air inlet (back and side)
Refrigerant piping
Air outlet
Spec name plate *1
Drain outlet
2.
Insert the negative
pole of AAA alkaline
batteries fi rst.
3.
Install the front lid.
3.
Press the DAY button
to set the day.
2.
Press either the TIME button
or the TIMER buttons to set
the time.
Each press increases/decreas-
es the time by 1 minute (10
minutes when pressed longer).
EN-3
EN