Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Inserting/Exchanging gobos
If you wish to use other forms and patterns as the standard-gobos, or if gobos are to be exchanged, please
follow the instructions below:
The side of the device head to be opened is marked with a dot.
1. Open the device head via the four housing screws (see Graphic 1).
2. Carefully remove the gobo (see Graphic 2).
Graphic 1
Remove the fixation-ring with an appropriate tool. Remove the gobo and insert the new gobo. Press the
fixation-ring together and insert it in front of the gobo.
Install the gobos with the device switched off only.
Unplug from mains before!
Never unscrew the screws of the rotating gobo
as the ball bearing will otherwise be opened!
Slot-in gobo-system for exchanging gobos without tools!
Inserting/Exchanging gobos as described above.
DANGER!
Graphic 2
CAUTION!
Note!
21/28
00143841, Version 1.1
Werbung
Inhaltsverzeichnis
