PROLED PIXEL CONTROLLER PRO Bedienungsanleitung Seite 29

Bedienungsanleitung / Users manual
，SETUP - DATE-TIME – TIME
PROGRAM，
In TIME PROGRAM-menu you can start preinstalled programs automatically at desired time.
As long as no steps are existing, you can only chose: ADD NEW STEP.
When steps are already existing, you can see the starting time and program number of each step.
In the last line you will see ADD NEW STEP, which allows to enter a new step.
With UP/DOWN-buttons you can select each line. If you select ADD NEW STEP and confirm with ENTER-
button, you can set the start time (hours and minutes) as well as the desired program. This you can do with
UP/DOWN-buttons. You can also choose STOP. This means, that from that time on no program is running
and all pixels become dark. With ESC-button you get back to previsious menu. The values will be saved and
resorted according to starting time.
If you want to edit an existing step, you have to mark it and press ENTER-button. At the end of the line you
will see EDIT and DEL. If you press ENTER-button and EDIT is inverted, than you can change the values.
If you invert DEL with the UP/DOWM-buttons and press ENTER-button, than this step will be deletedt
With ESC-button you can leave the menu. The values will be saved.
，SETUP – CUSTOMIZE -
LANGUAGE，
Possibility to change the language. The inverted language is the current language.
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany 29
www.proled.com