PROLED PIXEL CONTROLLER PRO Bedienungsanleitung Seite 26

RGB – 3ch:
Three DMX-channels control all pixel in same way. With 3 channels you can mix all
colours. All pixel do same colour.
RGB2 – 6ch:
Channel 1, 2 and 3 define the colour of the first pixel. Channel 4, 5 and 6 define the
colour of the last pixel. All pixel in between are changed automatically, so the result is a
smooth colour change between first and last pixel.
PIXEL -1024ch: Every pixel can be controlled separately. This mode is especially for example for
projects with lighting wall, where every single LED must be controlled.
EFFECT1 - 1ch: Simple one channel effect control. Preinstalled effects can be started by channel value.
EFFECTRGB – 14ch: Extended mode for effects. With 14 channels you can control 14 different setups.
1. GROUND COLOUR RED
2. GROUND COLOUR GREEN
3. GROUND COLOUR BLUE
4. EFFECT COLOUR RED
5. EFFECT COLOUR GREEN
6. EFFECT COLOUR BLUE
7. PROGRAM
8. SPEED
9. LENGTH
10. SOFT
11. WAIT
12. EFFECT COUNT
13. EFFECT START
14. MASTER
GROUND COLOUR RED, GREEN, BLUE
Colour of the pixel, if no effect is on that position.
EFFECT COLOUR RED, GREEN, BLUE
Colour of the pixel, when the effect is running. If all values are 0, than random colours will be used.
PROGRAM
0...9:
STOP
10...45
P1: from first to last pixel
46...80
P2: from last to first pixel
81...115:
P3: from middle to first and last pixel (both directions)
116...150:
P4: random start position, decreasing to last pixel
151...185:
P5: random start position, decreasing to first pixel
186...220:
P6: random start position, decreasing to both directions
221...255:
P7: random start position, random direction
MBN GmbH, Balthasar-Schaller-Str. 3,
Bedienungsanleitung / Users manual
86316 Friedberg - Germany
www.proled.com
26