PROLED PIXEL CONTROLLER PRO Bedienungsanleitung Seite 27

SPEED
Velocity: 0 = slow, 255 = fast
LENGTH
Amount of parallel visible pixels.
SOFT
Soft change between effect and ground colour.
0 = immidiately change between effect and ground colour
1-254 = the higher the value, the slower is the change from ground colour to effect colour
255 = softly change between effect and ground colour.
WAIT
When the colour has reached maximum, than the await time begins. Here you can set the wait time.
EFFEKT COUNT
Amount of visible effects at one time
0...9:
OFF
10...19:
1 EFFECT
20...29:
2 EFFECTS
....: ... EFFECTS
150...255:
15 EFFECTS
EFFECT START
AUTO: effect starts automatically
ENTER / IR: Effect starts when ENTER is pressed or contact will be closed
MASTER
Master brightness for all pixel
MBN GmbH, Balthasar-Schaller-Str. 3,
Bedienungsanleitung / Users manual
86316 Friedberg - Germany
www.proled.com
27