Charger Controls; Control Functions - ROBBE Power Peak C8 EQ-BID Bedienungsanleitung

3.

CHARGER CONTROLS

Screen
EDIT button
VIEW button
MODE button
USB socket
for updating
3.1

CONTROL FUNCTIONS

MODE BUTTON
• Press 1 x to start a charge process;
Press 2 x to start a discharge process;
Press 3 x to start a discharge / charge process (cycle charge).
VIEW BUTTON
• Displays the charger's various parameters, e.g. input voltage. It is also possible to dis-
play all the individual cell voltages of a connected LiPo battery using this button.
EDIT BUTTON
• Pressing the "EDIT" button takes you to the battery parameter and set-up menu.
"+" / BUTTON
• When adjusting a parameter (battery type, cell count, etc.) this button is used to incre-
ase the value by one increment; at the menu select stage it selects the next menu. The
button features an auto-repeat function: holding it pressed in has the same effect as
repeatedly pressing the button.
"-" / BUTTON
• When adjusting a parameter (battery type, cell count, etc.) this button is used to decre-
ase the value by one increment; at the menu select stage it selects the previous menu.
The button features an auto-repeat function: holding it pressed in has the same effect
as repeatedly pressing the button.
SELECT WHEEL
• When rotated, the Select Wheel duplicates the "+" / "-" buttons.
ENTER BUTTON
• Pressing the 'ENTER' button confirms a selection – e.g. activating a selected sub-menu
– or adopts a previously set value.
Operating Instructions
Power Peak ® C8 EQ-BID
6
No.
8553
Power supply
"+" / button
Select wheel
Battery sockets
"-" / button
Voltage sensor
socket
BID socket
ENTER button