Linea 2000 DOMO DO537FR Gebrauchsanleitung Seite 34

USE
Place the appliance on a flat, stable and heat-resistant surface. Make sure that there is at least 30 cm
1.
of free space around the appliance.
2. Check that the grille is inserted in the fryer. Push the grille into place so that it sits level on the
bottom. Do not place any oil or fat in the fryer.
3. Slide the frying pan with the empty
the handle in the left-hand side of the appliance and/or the fryer with the letter 'R' in the right-hand
side of the appliance.
Caution: Never use the frying pan without the
4. Plug the power cord into a socket. A beep indicates that the device is in standby mode.
5. Remove the deep fryer from the device. Place the ingredients in the deep fryer with the roaster.
Do not put too many ingredients in the appliance so that the ingredients do not touch the heating
elements. Pay attention to the MAX indication in the deep fryer here.
Put the deep fryer with the filled roaster back in the device.
6.
Press the on/off button to make the desired settings.
7.
The display lights up. Press 'L' or 'R' to set the left or right side. You can adjust both sides individually
8.
as required. You can also choose to set just one side and not use the other.
9. Set the desired timer (up to 60 minutes) using the timer setting arrows. You can see which timer is
selected on the display.
10. Set the desired temperature (80°C-200°C) using the temperature setting arrows. You can see which
temperature is selected on the display.
11. Press 'L' or 'R' to set the other side in the same way when you want to use both sides at the same
time.
12. Press the on/off button to start. The motor in operation symbol will appear on the display. The motor
in operation symbol remains visible on the display as long as the appliance is switched on. The set
timer and temperature appear alternately on the display. When you start the appliance, the heating
symbol also appears on the display. This symbol disappears once the appliance has reached the right
temperature.
13. You can take the fryer basket out of the appliance in between to shake up the ingredients or to check
how fried your food is. The appliance stops working automatically and will continue working (if the
set time has not yet elapsed) when you slide the fryer basket back into the appliance.
Attention: always hold the fryer basket by the handle. Other parts will become hot during use.
14. At the end, a bell will ring to indicate that your food is ready. The unit then switches off
automatically. You can also turn it off earlier by pressing the on/off button.
15. Remove the deep fryer from the appliance and place it on a heat-resistant holder. You can put the
food in a bowl or take it out of the deep fryer with heat-resistant tongs that do not scratch the non-
stick coating of the deep fryer.
COMMENTS
· An acoustic signal is emitted for each setting you set on the device.
You can adjust the set temperature or time at any time while the unit is in operation.
·
Excess oil is collected in the deep fryer.
·
· If your food is not ready after the set time has elapsed, you can always switch the appliance back on
for a few minutes.
After the appliance has been switched off, it will continue to run for a while to cool down.
·
· There is no need to preheat the appliance. You can add three minutes to the desired baking time if
necessary for frozen products.
34
DO537FR
grille inside the fryer. Place the fryer basket with the letter 'L' on
grille inside.