urmet 1092/219 Bedienungsanleitung Seite 34

This option allows to give a name to the camera and display this name on the desired position of the
monitor.
Select ON to access the following submenu, where it is possible to assign a name to the camera.
ABCDEFGHIJKLMNO
PQRSTUVWXYZabcd
efghijklmnopqrs
tuvwxyz01234567
89 ()<>-/#*!?,.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Put the button in the different positions to move on the desired character.
Press the central button to confirm it.
Select CLR to delete the selected characters.
Select POS and press the button to automatically quit the submenu and display the previously selected
characters.
Use the arrows /
Put the button on the telecamera in the different positions to move the characters in the desired position.
Once the position has been defined, press again the button to go back to the previous menu.
To quit the menu select END.
This function allows to detect movements in the camera captured images. At any sudden movement (for
example, a door opening), the operator will be informed with a blinking icon on monitor right side.
Select this menu item with the right button, select ON with the left button and press the central button to
access to the following submenu:
AREA SEL.
AREA STATE
HEIGHT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
DEGREE
VIEW
RETURN
34
All manuals and user guides at all-guides.com
CAM TITLE– CAMERA NAME
CLR POS END
to move and separate the selected characters.
MOTION – MOTION DETECTOR
MOTION
AREA1
ON
■■■■■■█■■004
■■■■■█■■■004
■■■█■■■■■002
■■■■■■█■■002
■■■■█■■■■038
ON
RET
DS1092-132