urmet 1092/219 Bedienungsanleitung Seite 28

BRIGHTNESS
Select BRIGHTNESS and move the button to the right or left to change brightness percentage.
AGC – AUTOMATIC GAIN CONTROL
This function is used when the camera is looking at images under low brightness conditions.
It is possible to choose among the following options: HIGH (AGC High), MIDDLE (AGC Middle), LOW
(AGC Low) and OFF (AGC Off).
The function DWDR is the digital version of WDR (Wide Dynamic Range): This allows a better balance of
brightness of light and dark areas to obtain a more detailed image. Selecting and pressing the ON button to
access the following submenu:
LEVEL
RETURN
LEVEL
Selecting and moving to left or right you can reduce the differences in brightness between light and dark
areas.
This function is used to select white balancing mode.
Select this menu item to choose among
Option
ATW
AWC-SET
MANUAL
Selecting MANUAL you can access the following submenu for manual adjustment of white balance:
COLOR TEMP
RED
BLUE
RETURN
Important note: you should preferably use the ATW
28
All manuals and user guides at all-guides.com
DWDR – DIGITAL WIDE DYNAMIC RANGE'
DWDR
■■■■■█■■■035
WHITE BAL – WHITE BALANCING
ATW1, ATW2, AWC-SET MANUAL
Value
ATW1 ÷ ATW2
/
MANUAL ÷ OUTDOOR
÷ INDOOR
WB MANUAL
INDOOR
■■■■■■■■■
■■■■■■■■■
RET
RET
Description
Auto Tracking White Balance mode allows an automatic
adjustment based on surrounding environment detection
(outdoor or indoor).
White balancing setting, to be used when a single
adjusting is preferred to automatic adjusting (constant
lighting condition). Press the menu button to activate this
function.
Manual adjustment of the colors red and blue. Choose
among the values between 0 and 255. (See below)
OUTDOOR: better for outdoor installations
INDOOR: preferable for indoor environments
option.
modes.
.
DS1092-132