Blc - Back Light Compensation - urmet 1092/219 Bedienungsanleitung

Note: this menu is active only if the camera is in DAY mode or set to fixed color mode;it does not work in
NIGHT mode or if it is set to fixed Black/White mode (in this last case, the option BLC of the BACKLIGHT
menu is replace by "----").
An object with a strong light in the background usually appears dark and not so visible if compared with the
rest of image. The BLC function allows to solve this problem and obtain a good compensation.
Selecting this menu item you can choose among the options OFF (not active), BLC and HLC
BLC is accessed by selecting the following submenu:
AREAL SEL
AREA STATE
GAIN
HEIGHT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
RETURN
Option
AREA SEL
AREA STATE
GAIN
HEIGHT
WIDTH
LEFTH/RIGHT
TOP/BOTTOM
RETURN
DS 1092-132
All manuals and user guides at all-guides.com
BLC – BACK LIGHT COMPENSATION
BLC
AREA1
ON
■■■■■■█■■■139
■■■■█■■■■■007
■■■■■■■█■■009
■■■■■█■■■■002
■■■■■■■█■■004
END
Value
This option allows to select one of the 2 areas available
AREA1 ÷ AREA2
for programming.
This option allows to enable (ON) or disable (OFF) the
selected area (it is possible to enable or disable only the
ON ÷ OFF
area 2; the area 1 is always active with BLC ON and
disabled with BLC OFF)
It allows to change the brightness gain value on the
014 ÷ 255
selected area.
It allows to change the height of the selected area.
000 ÷ 010
It allows to change the width of the selected area.
000 ÷ 010
It allows to move the selected area horizontally.
000 ÷ 015
It allows to move the selected area vertically.
000 ÷ 013
It allows to quit the submenu.
RET
Description
29