Vertical Adjustment - urmet 1092/219 Bedienungsanleitung

VERTICAL ADJUSTMENT

Loosen the ring on the bracket and the adjusting screws shown in the figure.
•
put the bracket in vertical position
•
point the camera at the vertical position
•
point the camera at the desired position
Once the adjustment has been performed, tighten the screws and the ring by locking it with the grub
screw and the suitable spanner (provided).
ADJUSTING SCREW
Important note:
Do not rotate excessively the camera, in order not to damage the cable inside the bracket.
5. Connect the video output to the selected terminal device.
6. Power the telecamera.
Unscrew the screw on the bottom of the camera to access to the adjustment screws and to the OSD
menu button.
24
All manuals and user guides at all-guides.com
Power cable
Video input
Video out cable
UNSCREW
REGULATIONS
Alimentation
FOR ACCESS TO
DS1092-132