Kenwood DPX-M3300BT Schnellstartanleitung Seite 15

Note for specifications
Bluetooth Frequency Range:
2.402 GHz — 2.480 GHz
Bluetooth RF Output Power (E.I.R.P.):
+4 dBm (MAX), Power Class 2
Speaker Impedance:
4 Ω — 8 Ω
Operating Voltage:
12 V DC car battery
Bluetooth®
• Depending on the Bluetooth version, operating system and the
firmware version of your mobile phone, Bluetooth features may not
work with this unit.
• Be sure to turn on the Bluetooth function of the device to make the
following operations.
• Signal conditions vary depending on the surroundings.
Connect the microphone
Connect the supplied microphone to the microphone input jack on the rear
panel.
Adjust the
microphone
angle
Pair and connect a Bluetooth device for the first time
1 Press B SRC to turn on the unit.
2
Search and select the name of your receiver ("DPX-M3300BT") on the
Bluetooth device.
"PAIRING"
KNOB" appears on the display.
• For some Bluetooth devices, you may need to enter the Personal
3
Press the volume knob to start pairing.
"PAIRING OK" appears when pairing is completed.
Once pairing is completed, Bluetooth connection is established
automatically.
• "
• The strength of the battery and signal of the connected device are shown
on the supplementary display.
Answer a call
Press
• To adjust the phone volume [00] to [35], turn the volume knob.
• To end a call, press
Audio player via Bluetooth
Press B SRC repeatedly to select BT AUDIO.
1
• Pressing
2
Operate the audio player via Bluetooth to start playback.
To
Play back/pause
Secure using cord
clamps (not supplied)
Select group or folder
if necessary.
Reverse skip/Forward skip
Reverse/Fast-forward
Repeat play
Random play
"PASS XXXXXX" "Device name"
Identification Number (PIN) code immediately after searching.
" and/or " " indicator on the display window lights up.
or the volume knob or one of the number buttons (1 to 6).
.
enters BT AUDIO directly.
On the faceplate
Press 6 IW.
Press 1
Press
Press and hold
Press 4
Press and hold 3
or [GROUP RANDOM].
"PRESS" "VOLUME
/ 2 .
.
.
repeatedly.
to select [ALL RANDOM]
7