Belden Lumberg automation EtherNet/IP 0980 LSL 3111-121-0006-002 Handbuch Seite 131

12 CIP-Objektklassen
Attribut Name
3 Input Data
Extension
4 Output Data
Swapping Mode
5 Output Data
Swapping Offset
6 Input Data
Swapping Mode
7 Input Data
Swapping Offset
8 IOL Failsafe
9 Port Mode
Handbuch EtherNet/IP
Version 2.2 10/2022
Zugang Datentyp
Get, Set SINT
Get, Set SINT
Get, Set SINT
Get, Set SINT
Get, Set SINT
Get, Set SINT
Get, Set SINT
12.2 Herstellerspezifische
Objektklassen
Beschreibung
0: No Data
1: Extended Status
2: Events
3: Extended Status + Events
Only settable when no connection is
established.
0: Raw IO-Link Data
1 .. 16: 1 .. 16 WORD
17 .. 24: 1 .. 8 DWORD
Only settable when no connection is
established.
0 .. 30 Byte
Only settable when no connection is
established.
0: Raw IO-Link Data
1 .. 16: 1 .. 16 WORD
17 .. 24: 1 .. 8 DWORD
Only settable when no connection is
established.
0 .. 30 Byte
Only settable when no connection is
established.
0: Set Low
1: Set High
2: Hold Last
3: Replacement Value (transferred via
IO-Link Failsafe Parameter Object)
4: IO-Link Master Command
0: Deactivated
1: Manual (with validation and backup
config)
2: Autostart (no validation and backup
config)
131