Belden Lumberg automation EtherNet/IP 0980 LSL 3111-121-0006-002 Handbuch Seite 124

12.1 EtherNet/IP-Objektklassen
Instance-Attribut (Instanz 1)
Attribut Name
1 LLDP Enable
2 msgTxInterval
3 msgTxHold
4 LLDP Datastore
5 Last Change
124
Zugang Datentyp
Get/Set STRUCT
Get/Set UINT
Get/Set USINT
Get WORD
Get UDINT
12 CIP-Objektklassen
Beschreibung
LLDP Enable Array Length (UINT): 1
+ Class attribute 2 from the Ethernet
Link Object (0xF6) = 3
LLDP Enable Array (BYTE):
b0: Global Enable, LLDP Tx & Rx
Enabled (1)
b1: LLDP Tx Enabled (Intance 1 of
Ethernet Link Object) (1)
b2: LLDP Tx Enabled (Intance 2 of
Ethernet Link Object) (1)
From 802.1AB-2016: Interval in
seconds for transmitting LLDP frames
from this device
0 .. 4 = Reserved
5 .. 32768 = Message Transmission
Interval for LLDP frames (30)
32769 .. 65535 = Reserved
From 802.1AB-2016: Multiplier of
msgTxInterval to determine the value
of the TTL TLV sent to neighboring
devices
0 = Reserved
1 .. 100 = Message Transmission
Multiplier for LLDP Frames (4)
101 .. 255 = Reserved
Indication of the retrieval methods for
the LLDP database:
b0: LLDP Data Table Object (0)
b1: SNMP (1)
b2: NETCONF YANG (0)
b3: RESTCONF YANG (0)
b4 .. b15: Reserved (0)
Counter in seconds from the last time
any entry in the local LLDP database
changed or power up
Handbuch EtherNet/IP
Version 2.2 10/2022