Belden Lumberg automation EtherNet/IP 0980 LSL 3111-121-0006-002 Handbuch Seite 115

12 CIP-Objektklassen
Instance-Attribut (Instanz 1)
Attribut Name
1 Network Topology
2 Network Status
10 Active Supervisor
Address
12 Capability Flags
Handbuch EtherNet/IP
Version 2.2 10/2022
Zugang Datentyp
Get BOOL
Get BOOL
Get ARRAY
Get DWORD
12.1 EtherNet/IP-Objektklassen
Beschreibung
0 = Linear
1 = Ring
0 = Normal operation
1 = Ring Fault
2 = Unexpected Loop Detected
3 = Partial Network Fault
4 = Rapid Fault/Restore Cycle
Supervisor IP Address, Supervisor
MAC Address (0 = not configured)
Flag description:
b0: Announce-based Ring Node ("0")
b1: Beacon-based Ring Node ("1")
b2 .. 4: Reserved ("0")
b5: Supervisor Capable ("0")
b6: Redundant Gateway Capable ("0")
b7: Flush_Table frame Capable ("1")
b8 .. 15: Reserved ("0")
115