Tuner Mode - Grundig M 1000 BT Bedienungsanleitung

TUNER MODE

Automatic station search for FM
radio stations
1
Switch on the hi-fi system by pressing »
2
Select TUNER with »SOURCE« on the re-
mote control or »
3
For the automatic station search press and
PROG« on the remote
hold »MEMORY
control for 2 seconds. .
– Display: »AUTOSCAN«.
– The device searches for up to 40 stations
with strong reception and stores them auto-
matically. After the search has finished, you
will hear the station stored at preset 01.
Notes:
You can cancel the automatic station search
7
by pressing » «.
7
You can restart the automatic station search
7
by pressing »MEMORY
frequency display changes to rapid run-
through.
Setting and storing radio stations
manually
1 Set the radio station by briefly pressing
»TUN – 1 0 – « or »TUN+
– Display: the frequency changes in steps of
50 kHz;
or
press and hold down
10+« until the frequency changes to
»TUN+
rapid run-through.
2
Save a radio station as a preset by pressing
PROG«, selecting the preset
»MEMORY
with » « or »
3
press »PROG« to save.
3 To search and save more radio stations, re-
peat steps 1 to 2.
Selecting presets
1
Select a preset by pressing »
on the appliance or »
remote control.
------------------------------------------------------------------------------------------------------------------------
8 «.
« on the appliance.
PROG« until the
10+« repeatedly.
»TUN – 1 0 –
« or
« and then
4
« or » «
« or » « on the
Displaying RDS station informa-
tion
If the device receives an RDS station, the sta-
tion name appears in the display together with
»RDS«. If no information is available, the recep-
tion frequency appears in the display.
Additional information can be displayed.
1
To display information on the current RDS
station, press »INFO« repeatedly.
– The following displays appear in sequence:
The name of the radio station.
The current programme type (PTY), e.g.
»Pop music«. »[No PTY]« appears if infor-
mation is not available.
The time.
The radio text.
The frequency.
27
ENGLISH