IKEA Renlig FWM7 Gebrauchsanleitung Seite 23

ENGLISH
First try to find a solution to the problem (re-
fer to the table). If not, contact the service
centre.
With some problems, the acoustic signals
operate and the display shows an alarm
code:
•
- The appliance does not fill with
water.
Problem Possible cause
The door has not been closed
The plug is not properly inserted in
the power socket.
There is no power at the socket.
The main fuse or the fuse in a plug
has blown.
The appliance
The programme selector dial is not
does not start:
correctly positioned and the button
5 has not been pressed.
The delay start has been selected.
The Child Lock function is activa-
ted.
The water tap is closed.
The inlet hose is squashed or
kinked.
The appliance
The filter in the inlet hose or the in-
does not fill:
let valve filter are blocked.
The door is not properly closed.
The drain hose is squashed or
kinked.
The appliance The drain filter is clogged.
does not drain
An option or a programme that
the water:
ends with the water still in the tub
or a that eliminates all the spinning
phases has been selected.
•
- The appliance does not drain the
water.
•
- The appliance door is open or not
closed correctly.
Warning! Switch off the appliance
before you do the checks.
Solution
Close the door firmly.
Insert the plug into the power
socket.
Please check your domestic electri-
cal installation.
Replace the fuse.
Please turn the selector dial and
press the button 5 again.
If the laundry are to be washed
immediately, cancel the delay
start.
Deactivate the Child Lock function.
Open the water tap.
Check the inlet hose connection.
Clean the water inlet filters. (See
"Cleaning the water inlet filters"
for more details).
Close the door firmly.
Check the drain hose connection.
Clean the drain filter.
Select the draining or spinning
programme.
23