Cooking With Smart Chef Programs - Philips HD987 Serie Bedienungsanleitung

Cooking with Smart Chef programs

Season your ingredients as desired. Put the food inside the basket and
slide the basket inside the appliance.
Note
Do not use honey, syrups or any other sugary ingredients to season your food,
•
since the browning will get very dark.
1 Press the On/Off button
2 To change the Smart Chef program, turn the QuickControl dial until
the desired icon is blinking.
2
3 To confirm the Smart Chef program, press the QuickControl dial.
» The appliance automatically calculates the ideal cooking
Note
To prepare a whole chicken, weigh the chicken before placing it in the basket.
•
Choose the weight by turning the QuickControl dial and pressing it to confirm.
Do not pull out the drawer as long as the appliance is calculating the cooking
•
time, which is indicated by blinking bars on the display. Otherwise the Smart
Chef program will stop, and the appliance will reset to the main menu. Proceed
cooking with the manual mode because restarting the Smart Chef program
with partially cooked food will lead to a wrong estimation of the cooking time.
As soon as the calculation phase is finished you will see the temperature and
•
time displayed continuously (without blinking bars), and you may open the
drawer to check the status of the food.
to switch on the appliance.
temperature and time. The screen displays the first estimated
cooking temperature and time after a few minutes. During this
time the appliance has already started cooking. As long as the
screen displays the blinking bars and the temperature/time
alternately, the appliance is still calculating the cooking time, and
the appliance will automatically adjust the time during cooking.
ENGLISH 15