Philips HD987 Serie Bedienungsanleitung Seite 12

12 ENGLISH
2
10 Push the QuickControl dial to confirm the selected temperature.
» After the temperature is confirmed, the time indication starts
blinking on the screen.
11 Turn the QuickControl dial to choose your desired cooking time.
Note
If you press the favorite button
•
time as your favorite cooking settings. Any previously saved settings will be
overwritten. For more details, refer to chapter "Save your favorite setting".
Refer to the food table for manual time/temperature settings for different
•
types of food.
12 Push the QuickControl dial to confirm the selected time.
13 The appliance starts cooking after the cooking time has been
confirmed.
Tip
To pause the cooking process, push the QuickControl dial. To resume the
•
cooking process, push the QuickControl dial again.
To change the cooking temperature or time during cooking, repeat steps 8–10.
•
To cancel any ongoing process and go back to the main menu, press the return
•
button .
Note
If you do not set the required cooking time within 30 minutes, the appliance
•
automatically shuts off for safety reasons.
If "- -" is selected as the time indication, the appliance goes into preheating
•
mode.
Some ingredients require shaking or turning halfway through the cooking time
•
(see 'Food table'). To shake the ingredients, press the QuickControl dial to
pause cooking, open the drawer and lift the basket out of the pan and shake it
over the sink. Then slide the pan with the basket back into the appliance, and
press the QuickControl dial to resume cooking.
If you set the timer to half the cooking time, when you hear the timer bell
•
it is time to shake or turn the ingredients. Be sure to reset the timer to the
remaining cooking time.
14 When you hear the timer bell, the cooking time has elapsed.
you will save this cooking temperature and