Philips HD987 Serie Bedienungsanleitung Seite 23

Problem Possible cause
After starting a Smart The cooking chamber
Chef program the temperature is too high
appliance stopped either because the appliance
the calculation phase. is pre-heated or has not
cooled down sufficiently
between two batches.
The drawer is opened during
the calculation phase.
The drawer is not closed
properly.
The appliance has The drawer is opened during
stopped cooking the calculation phase.
with the Smart Chef
program.
I see some peeling Some small spots can
off spots inside my appear inside the pan of the
Airfryer. Airfryer due to the incidental
touching or scratching of the
coating (e.g. during cleaning
with harsh cleaning tools
and/or while inserting the
basket).
White smoke comes You are cooking fatty
out of the appliance. ingredients and the fat
reducer is not put in the pan.
The pan still contains greasy
residues from previous use.
Breading or coating did not
adhere properly to the food.
Marinade, liquid or meat
juices are splattering in the
rendered fat or grease
My display shows 5 This is an error code.
dashes as illustrated
in the picture below.
Solution
Keep the drawer open for some minutes to
cool it down. Close it and start the Smart Chef
program again.
Close the drawer and proceed cooking with the
manual mode.
Make sure that the drawer is closed properly.
Do not pull out the drawer as long as the
appliance is calculating the cooking time, which
is indicated by blinking bars on the display.
You can prevent damage by lowering the basket
into the pan properly. If you insert the basket at
an angle, its side may knock against the wall of
the pan, causing small pieces of coating to chip
off. If this occurs, please be informed that this is
not harmful as all materials used are food-safe.
Carefully pour off any excess oil or fat from the
pan, place the fat reducer in the pan and then
continue cooking.
White smoke is caused by greasy residues
heating up in the pan. Always clean the pan,
basket and fat reducer thoroughly after every
use.
Tiny pieces of airborne breading can cause
white smoke. Firmly press breading or coating to
food to ensure it sticks.
Pat food dry before placing it in the basket.
1. Unplug the appliance and let it rest for 5
minutes before plugging in again.
2. If your display still shows the dashes, call
the Philips service hot line or contact the
Consumer Care Center in your country.
ENGLISH 23