Technical Data; Unpacking - Scheppach DP4500 Original Bedienungsanleitung

Danger caused by materials and other substances
Contact, inhalation
The emissions of the machine may cause damages
to health.
– Only use the motor driven machine outdoors.
Fire, explosion
m Fuel is flammable.
– During work and refuelling smoking and open
flames are prohibited.
In case of emergency
In case of a possibly occuring accident take the nec-
essary first aid steps as appropriate and obtain qual-
ified medical aid as quickly as possible.
If you obtain aid please give the following infor-
mations:
1. Where did it happen
2. What happened
3. How many injured
4. Type of injury
5. Who is reporting!

7. Technical data

Engine
Transmission
Load capacity
Box length
Box width
Box Depth
Weight
Engine Type
Idle speed
maximum RPM
Motor Starters
Unleaded fuel octane number
Fuel
90 and max. ethanol of 5%
Fuel tank capacity
Required engine oil
Gear oil
Max. slope
Max. oil tank
capacity
Subject to technical modifications!
Noise
m Warning: Noise can have serious effects on
your health. If the machine noise exceeds 85 dB (A),
please wear suitable hearing protection.
30 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
4,1 kW
3F+1R
400 kg
840 mm
626 mm
289 mm
172 kg
4-stroke engine
1700 1/min.
4000 1/min.
Recoil starter
3,6 l
SAE 10W-30
SAE30 / 80W-90
30°
0,6 l
Information concerning noise emission meas-
ured according to relevant standards:
Sound pressure L = 79,4 dB(A)
pA
Sound power L = 99,4 dB(A)
wA
Uncertainty K = 2 dB(A)
pA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Vibration Left Steering Lever A
Vibration Right Steering Lever A
Uncertainty K = 1,5 m/s
2
PA
The specified vibration emission value has been meas-
ured according to a standardised testing procedure
and can be used for comparison of one electric tool
with another. The specified vibration emission value
can also be used for an initial assessment of the load.
m WARNING
The vibration emission value can vary from the spec-
ified value during the actual use of the electric tool,
depending on the type and the manner in which the
electric tool is used. Try to minimise stress from
vibrations as low as possible. Some examples of
means for reducing the vibration stress are wearing
gloves while using the tool and limiting work time. In
the process all parts of the operating cycle must be
taken into account (such as times in which the elec-
tric tool is switched off or time in which it is switched
on, but is not running under a load). Limit the noise
and vibration to a minimum!

8. Unpacking

Open the packaging and remove the device carefully.
Remove the packaging material as well as the pack-
aging and transport bracing (if available)
Check that the delivery is complete. Check the device
and its spare parts for possible damage caused by
transportation. In the event of complaints, you must
contact the distributor without delay. Claims at a later
stage will not be accepted. If possible, store the pack-
aging until the warranty period has expired Before
handling the device, make yourself familiar with it by
reading the operating instructions.
For accessories, consumables and spare parts, only
use original parts. Spare parts are available from
your stockist.
Include our item number, the device model and year
of manufacture in your order.
m Attention!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!
= 10,1 m/s
2
hv
= 11,3 m/s
2
hv