EINHELL EST 170 Gebrauchsanweisung Seite 5

Anleitung EST 170 02.11.2001 10:26 Uhr Seite 5
Note!
Always wear safety goggles and a
dust mask.
Always keep the dust extraction holes
in the vibrating plate free of dirt or
other obstructions.
Special acessories
Sandpaper
Grain Packed in Art. no.
units of
40, coarse 10
60, medium 10
100, fine 10
In order to take full advantage of your
vibrating grinder, always use original
Einhell special accessories, available
at all hardware shops.
Attaching sandpaper
– Remove the plug from the mains
supply.
– Insert the end of the sandpaper and
close the clamping mechanism.
– Draw the sandpaper tigth over the
vibrating plate and clamp the other
end.
– Ensure that the holes match with the
vibrating plate.
Maintenance
– Always keep your vibrating grinder
clean.
– Do not use caustic cleaning agents
to clean the plastic housing.
– Check the carbon brushes is an
excessive amount of sparks is gene-
rated when working.
– Always keep the dust extraction
holes in the vibrating plate free of
dirt or other obstructions.
– Water must never come into contact
with the machine.
GB
44.602.00
44.602.01
44.602.02
5