Sunred DF15 Bedienungsanleitung Seite 15

5. Assemble the flame screen to the upper
support.
Secure the flame screen to the upper support
using 8pcs screw 3/16".
Hardware Used
3/16" Screw
Philips
screwdriver
6. Assemble the reflector onto the flame
screen.
Screw the 3pcs stud on the flame screen,
put 3pcs washer Φ6 onto the top of stud,
then put the reflector onto the stud, secure
them with 3pcs washer Φ6 and 3pcs wing
nut.
Hardware Used
Wing nut
Washer Φ6
Stud
www.sunred.nl