Troubleshooting - IKEA MUTEBO Serie Bedienungsanleitung

ENGLISH
Step 3 Remove and clean the metal
frame and the seal.
Step 4 Replace the lamp with a suita‐
ble 300 °C heat-resistant lamp.

Troubleshooting

Warning! Refer to Safety
chapters.
What to do if...
The appliance is not connected to an electri‐
cal supply or it is connected incorrectly.
The clock is not set.
The door is not closed correctly.
The fuse is blown.
The appliance Child Lock is on.
The lamp is burnt out.
Power cut always stops cleaning. Repeat
cleaning if it's interrupted by power failure.
How to manage: Error codes
When the software error occurs, the display shows error message.
In this section, you will find the list of the problems that you can handle on your own.
The appliance does not turn on or does not heat up
Possible cause
Description
Step 5 Install the metal frame and the
seal. Tighten the screws.
Step 6 Install the left shelf support.
Check if the appliance is correctly connected
to the electrical supply.
Set the clock, for details refer to Clock func‐
tions chapter, How to set: Clock functions.
Fully close the door.
Make sure the fuse is the cause of the prob‐
lem. If the problem recurs, contact a quali‐
fied electrician.
Refer to "Menu" chapter, Submenu for: Op‐
tions.
Components
Replace the lamp, for details refer to "Care
and Cleaning" chapter, How to replace:
Lamp.
Remedy
Remedy
112