AC Schnitzer 1100 286 710 Montageanleitung Seite 24

F itt in g In st ru ct io ns
AC Schnitzer Performance Upgrade S63B44T2
Connect the red line on the AC Schnitzer wiring harness to the twisted red line (CAN_high) of the vehicle.
Connect the blue line on the AC Schnitzer wiring harness to the twisted blue line (CAN_low) of the vehicle.
(see wiring diagram)
Expose the wiring harness plug to around 5cm from the plug. Cut around 5cm from the plug the red and blue
CAN_bus lines.
Solder the cable ends of the AC Schnitzer CAN_bus plug and the CAN_bus cable ends of the vehicle wiring harness
together using the solder connectors supplied.
Isolate solder connectors and wiring harness, and connect the AC Schnitzer CAN_bus plug to the AC Schnitzer wiring
harness.
Warning: Ensure signals are correctly allocated!
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
CAN_high = twisted red line / CAN_low = twisted blue line
Fitting Instructions No.: 1100 286 710 / Issue: 13.04.2016 / TSch / REV01
24
Fax -135