AC Schnitzer 1100 286 710 Montageanleitung Seite 21

F itt in g In st ru ct io ns
AC Schnitzer Performance Upgrade S63B44T2
2. Fitting.... (cont'd.)
Fig. 4
Lay wiring harness of the AC Schnitzer performance
upgrade as shown, and secure using the cable ties
supplied. Ensure that no kink and/or chafing points are
created on the wiring harness.
Fig. 5
In the front region, route the AC Schnitzer wiring
harness along the bonnet cable and attach.
The allocation of the signals required is marked
accordingly on the AC Schnitzer wiring harness. All
relevant signals are "picked up" at the respective
sensors/actuators.
To do this, detach the standard plug connection for the
corresponding sensor/actuator, and connect the correct
plug from the AC Schnitzer wiring harness between the
sensor/actuator and the standard plug connection.
Fig. 6 & 7
Boost pressure sensors right and left.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 1100 286 710 / Issue: 13.04.2016 / TSch / REV01
21
Fax -135