If You Go On Vacation; In The Event Of A Breakdown - La Sommeliere ECELLAR150 Gebrauchsanweisung

o
At the first start-up and following a prolonged shutdown of the cellar, it is possible that when
restarting the temperatures chosen and those displayed do not correspond. This is normal. It
will then be necessary to wait a few hours before the temperatures regain their stability.
o
In the event of a power cut, the device stores the set temperatures in memory. When the
appliance is put back into service, it is therefore unnecessary to reprogram the cellar
temperatures.
Warning ! During a power cut, the ECELLAR no longer records movements, so avoid modifying
the wine stock.
When the power is turned on again, the cellar will update the stocks in order to detect the
release or addition of a new bottle.
If an add or remove operation is performed via the app, it will save the changes, but if it is a free
action (without going through the app) and a bottle is removed and replaced by a new one at
the same location, the cellar will not make the distinction when it is restarted.

If you go on vacation

Short stays: let your cellar operate during your stay if it lasts less than 3 weeks.
Long stays: if your device is not to be used for several months, remove all bottles and accessories,
turn off and unplug the device from the power outlet. Clean and dry the inside and outside of the
appliance thoroughly. Also leave the door open, blocking it if necessary, to prevent the formation of
condensate, odors and mold.
If you need to move your wine cellar
o
Unplug your cellar before any operation.
o
Remove all bottles from the cellar and secure the moving parts.
o
To avoid damaging the leg leveling screws, screw them all the way into their base.
o
Close the door completely.
o
Move the device to a vertical position preferably or note from the inscriptions on the packaging,
the direction in which the device can be laid. Also protect your device with a blanket or similar
cloth.

7. IN THE EVENT OF A BREAKDOWN

Despite the care we take during production, a breakdown can never be totally excluded. Before
contacting your retailer's after-sales department, please check that:
The appliance is properly plugged in
There is not a power cut in progress
The breakdown is not one of those described in the table at the end of this manual
IMPORTANT: if the power cable supplied is damaged, it must be replaced by the manufacturer,
a service centre approved by the brand or the retailer. In all events, it must be replaced by
qualified personnel in order to avoid any risk of injury.
IF THESE CHECKS REVEAL NOTHING, THEN CONTACT YOUR RETAILER'S AFTER-SALES
DEPARTMENT.
CAUTION!
Unplug the appliance before carrying out any maintenance or repair work.
73