View The Location Of Your Bottles In Your Cellar; Cellar Maintenance; Care And Maintenance - La Sommeliere ECELLAR150 Gebrauchsanweisung

associated wine sheet
o
Click on "schedule an alert"
o
Indicate from how many bottles remaining you wish to receive a stock alert
o
Click on validate. The stock alert is now activated.
To deactivate a stock alert, click on "modify alert"; decrease the number of desired bottles
until "deactivate". Click on validate. The stock alert is now deactivated.
Create peak date alerts
To create peak date alerts, it is mandatory to enter a minimum aging time (greater than 0) and a
maximum aging time on the wine sheet. The conservation time is expressed in years. You will be sent
an alert for the start and end of the peak date if your bottle has not been consumed. A wine from the
year "X" with a minimum conservation time of 5 years and maximum of 10 years will alert you as
follows:
- Year "X" + 5 years: Early peak date alert "Your bottle is ready to be tasted"
- Year "X" + 10 years: End of peak date alert "Your bottle is at the end of its peak date"

View the location of your bottles in your cellar

You are on view from your cellar; Use the search icon located at the top right of your screen
Indicate the name of the desired wine and / or domain and / or other information related to the bottle
The wine sheet of the desired bottle is displayed
Click on the button located at the bottom of the page "See my bottles" or on the button "Show in the
cellar" located at the beginning of your wine sheet.
Indicator lights light up in your cellar, up to a limit of 12 simultaneously, to show you the location of the
bottle (s) you are looking for.

Cellar maintenance

6. CARE AND MAINTENANCE

Before cleaning your appliance (something that should be done regularly), disconnect it by removing
the plug or by pulling the fuse on the circuit.
From the cellar configuration, it is possible to put your cellar in maintenance.
This manipulation blocks all movements that may take place in the cellar
(addition, movement, deletion).
The reception view is therefore blocked by a "cellar under maintenance" view
To exit maintenance mode, click on the "Exit maintenance" button.
Warning ! When you exit maintenance mode, you can:
▪
Reload the last registered layout
▪
Go back to an empty cellar. In that case you have to restart process
from the beginning and scan your first bottle.
71